optimum samsung cable box error codes?

Optimum Cable Box Error Codes
  • Error 200 – Physical Network Connection Failed.
  • OBV-005: No Internet in Box. 3 – NW-1-19 – Device not connected to the Internet. Conclusion.
  • Optimum Altice Error One Codes And Their Solutions.

Optimum Cable Problem

Reset your cable modem

1. Unplug the modem from its power source Once your modem is unplugged, all of the lights on the modem should go off. If the lights are on after you disconnect it, you may have a battery backup that also needs to be disconnected. So go ahead and disconnect that, too.

1. Unplug your cable box from either the wall outlet or the box itself. 2. Wait 5 seconds and plug it back in. The reset process may take 3-5 minutes. 3. During the reset process, the cable box may display a series of numbers, characters or letters. 4. When the front panel on the digital cable box displays turn on, the reset is complete. 5. Turn on your TV and cable box. There may be a slight delay while the menu screen loads.

1. To restart the digital cable box, simultaneously press VOL+, VOL- and INFO on the front of the digital cable box and hold until the digital cable box shuts down. 2. Release the buttons and the digital cable box will automatically reset. During the reset process, the digital cable box will display hold followed by turn on. This may take 3-5 minutes. 3. When the front panel on the digital cable box displays the time, the reset is complete. 4. Turn on your TV and cable box. There may be a slight delay while the menu screen loads.

1. Unplug your cable box from either the wall outlet or the box itself. 2. Wait 5 seconds and plug it back in. 3. During the reset process, the digital cable box will display hold followed by turn on. This may take 3-5 minutes. 4. When the front panel on the digital cable box displays the time, the reset is complete. 5. Turn on your TV and cable box. There may be a slight delay while the menu screen loads.

6. Check your internet connection Open your web browser and visit optimum.net. Once the page loads, youll be good to go. Not connected? Unplug the modem and router again, restart your computer and then repeat Steps 3 – 6. If you are still having trouble, contact our customer service team.

Leave a Comment